How to Fix a Fossil Watch Stuck in Bootloop Starting Screen

Guide to Fix a Fossil Watch Stuck in Bootloop Starting Screen:

Are you currently facing the frustrating issue of your Fossil watch being stuck in a bootloop with the never-ending “Starting” screen? Well, fear not! We’re here to help you get out of this predicament and get your watch back to working order.

WhatsApp Group Join Now
Telegram Group Join Now

A bootloop can be quite bothersome, leaving you feeling stuck and wondering how to fix it. But don’t worry, we’ve got you covered with some practical troubleshooting steps and solutions that can help get your Fossil watch up and running again in no time.

In this guide, we’ll cover possible causes of a Fossil watch stuck in a bootloop, provide you with troubleshooting tips, walk you through the process of disconnecting and resetting your watch, and offer various solutions to fix the bootloop issue. So, let’s dive right in and get your Fossil watch back on track!

Possible Causes of Fossil Watch Stuck in Bootloop

In this section, we’ll dive into two common culprits: battery not charging and Bluetooth issues. By understanding these causes, you’ll be one step closer to resolving the bootloop conundrum and getting your Fossil watch back in working order.

Battery Not Charging

Is your Fossil watch constantly restarting, despite being charged? The battery not charging properly can be a common reason behind a bootloop issue. Let’s dig deeper into some factors that could contribute to this problem:

  1. Faulty charging cable: Check if your charging cable is damaged or frayed. A worn-out cable might not deliver a consistent and stable charge to your watch, resulting in the bootloop. Try using a different charging cable to see if the issue persists.
  2. Loose connection: Ensure that the charging pins on your watch and the magnetic charger are properly aligned and connected. Sometimes, due to misalignment or dirt accumulation, the connection can become loose, leading to charging issues and the bootloop problem.
  3. Battery degradation: Over time, the battery in your Fossil watch can lose its capacity to hold a charge effectively. If you notice that your watch is draining quickly or not holding a charge for as long as it used to, it might be time to replace the battery.

⚙️ Pro Tip: To avoid battery-related problems, always use the original charging cable and avoid exposing your Fossil watch to extreme temperatures, as it can negatively impact the battery’s performance.

Bluetooth Issues

Is your Fossil watch stuck in a bootloop when trying to connect via Bluetooth? Bluetooth connectivity problems can also cause your watch to constantly restart. Let’s explore a couple of possible reasons why this might be happening:

  1. Compatibility issues: Ensure that your Fossil watch is compatible with the device you’re trying to pair it with. Some older devices might not support the latest Bluetooth protocols, leading to connectivity problems and the bootloop issue. Check the Fossil website or user manual to verify compatibility.
  2. Interference or distance: Bluetooth signals can be disrupted by interference from other electronic devices or obstructed by physical barriers. Make sure there are no devices emitting strong wireless signals or obstacles between your watch and the paired device.

✅ If you’re still experiencing the bootloop issue after troubleshooting these battery and Bluetooth-related causes, it’s recommended to reach out to Fossil’s customer support or visit an authorized service center. They will have the expertise and resources to further diagnose and resolve the issue.

🔗 Remember, understanding the potential causes of a bootloop problem in your Fossil watch is the first step towards finding a solution. By addressing battery charging and Bluetooth issues, you can overcome this frustrating situation and enjoy the full functionality of your beloved timepiece once again.

Fixing Fossil Watch Stuck in Bootloop

In this section, we’ll walk you through three different methods to fix this issue and get your watch back up and running smoothly.

Access Fastboot Mode and Perform Factory Reset

One of the first steps you can take to fix a Fossil watch stuck in a bootloop is to access Fastboot mode and perform a factory reset. Here’s how you can do it:

  1. Press and hold the middle button on your Fossil watch until the reboot menu appears.
  2. Scroll down and select “Boot into Fastboot Mode” using the middle button.
  3. Connect your watch to your computer using a USB cable.
  4. Open the command prompt or terminal on your computer.
  5. Enter the following command to verify if your Fossil watch is recognized: fastboot devices. If your device is listed, you’re good to go.
  6. Now, enter the command fastboot erase userdata. Confirm the operation if prompted.
  7. Finally, enter the command fastboot reboot to restart your watch.

This method should resolve the bootloop issue on your Fossil watch. However, if it doesn’t work for you, don’t worry, we have a few more tricks up our sleeves!

Force Restart Your Fossil Gen Watch

If you’re dealing with a Fossil Gen watch stuck in a bootloop, a force restart might do the trick. Here are the steps to perform a force restart:

  1. Press and hold the middle button and the bottom button simultaneously on your Fossil Gen watch.
  2. Keep the buttons pressed down until the watch vibrates and restarts. It may take around 10 seconds for the restart to occur.
  3. Once the watch restarts, release the buttons and wait for it to boot up normally.

Force Restart can often help resolve issues with the bootloop on a Fossil Gen watch. Give it a try and see if it works for you!

Factory Reset for Fossil Watch

If the previous methods haven’t solved the bootloop issue on your Fossil watch, you can try a factory reset. Here’s how:

  1. Press and hold the middle button and the bottom button simultaneously on your Fossil watch.
  2. Keep the buttons pressed down until the Fossil logo appears on the screen, then release them.
  3. Use the buttons to navigate to the “Recovery” option and select it by pressing the middle button.
  4. From the recovery menu, scroll down to the “Factory Reset” option and select it.
  5. Confirm the factory reset by scrolling to “Yes” and selecting it.
  6. Wait for the factory reset process to complete, and then select the “Reboot” option.
  7. Your Fossil watch will restart and hopefully boot up normally without getting stuck in a bootloop.

A factory reset should effectively resolve the bootloop issue on your Fossil watch by restoring it to its original settings.

Now that you have three different methods to try, you can hopefully fix your Fossil watch stuck in a bootloop and get it back to its normal functioning state. Give these methods a shot, and don’t forget to let us know which one worked for you. 

Connecting to External Power Source and Flashing

If your Fossil Gen watch is stuck in a bootloop, you can try connecting it to an external power source and then flashing it. This method has helped many users resolve their bootloop issues and get their beloved timepiece back up and running. Let’s dive into the steps you can take to troubleshoot this problem.

Step 1: Connect to an external power source

  1. Find a compatible USB cable and connect your Fossil Gen watch to a power source.
  2. Ensure that the power source is reliable and capable of providing a stable charge to your watch.
  3. Leave the watch connected to the power source for at least 10-15 minutes, allowing it to charge uninterrupted.

By connecting your watch to an external power source, you are ensuring that it has enough power to go through the flashing process successfully. This can often resolve any software glitches causing the bootloop.

Step 2: Flash your Fossil Gen watch

  1. Once your watch has gained sufficient charge, it’s time to proceed with the flashing process.
  2. On your computer, navigate to the Fossil Gen official website (insert internal link) and search for the latest firmware available for your watch model.
  3. Download the firmware file to your computer.
  4. Extract the firmware file from the downloaded archive, if necessary.
  5. Connect your Fossil Gen watch to your computer using a USB cable.
  6. Open the flashing tool provided by Fossil Gen (if available) or use a third-party flashing tool compatible with your watch model.
  7. Follow the instructions provided by the flashing tool to initiate the flashing process.
  8. Wait patiently for the flashing process to complete; this may take a few minutes.
  9. Once the flashing process is complete, disconnect your Fossil Gen watch from the computer and restart it.

Flashing your watch essentially involves reinstalling the software, which can fix any software-related issues causing the bootloop. Always remember to download the firmware from official sources to ensure compatibility and minimize any potential risks.

🔥 Pro Tips:

  • If you’re unsure about finding the appropriate firmware for your watch model, reach out to Fossil Gen customer support for assistance. They can guide you through the process and provide expert advice.
  • Backup your watch’s data before flashing, as the process may erase all your settings and personal information.

By following these steps, you can potentially save your Fossil Gen watch from the frustrating bootloop and enjoy its functionality and style once again. Give it a shot, and remember to reach out for help if you need it.

We hope the above solutions has helped you to Fix a Fossil Watch Stuck in Bootloop Starting Screen issue. If you have any queries, please feel free to ask them in the comment section below. Additionally, consider sharing this guide with your friends and bookmarking our website for more tutorials like this. 

Also Read:

Frequently Asked Questions

  1. What does it mean when my Fossil watch is stuck in a bootloop with the ‘Starting’ screen?
    When your Fossil watch is stuck in a bootloop with the ‘Starting’ screen, it means that it is unable to fully start up and is caught in a continuous loop of attempting to boot.
  2. How can I fix my Fossil watch stuck in the ‘Starting’ screen bootloop?
    To fix a Fossil watch stuck in the ‘Starting’ screen bootloop, try performing a hard reset by pressing and holding the power button for about 15 seconds until the screen goes black. Then, release the power button and press it again to turn on the watch. If this doesn’t work, you may need to contact Fossil customer support for further assistance.
  3. Why does my Fossil watch keep getting stuck in a bootloop?
    There can be various reasons why a Fossil watch gets stuck in a bootloop. It could be due to a software glitch, a firmware update issue, inadequate battery charge, or a hardware problem. Try to troubleshoot the problem by performing a hard reset and ensuring that your watch is fully charged.
  4. Will I lose my data if I perform a hard reset on my Fossil watch?
    Performing a hard reset on your Fossil watch will erase all data and settings on the device. It will be restored to its factory default settings. Therefore, it’s important to backup any important data before performing a hard reset.
  5. If a hard reset doesn’t fix my Fossil watch bootloop issue, what should I do?
    If a hard reset doesn’t resolve the bootloop issue on your Fossil watch, it’s recommended to contact Fossil customer support or take your watch to an authorized service center for further diagnostics and repairs.
Share on:
Vijaygopal Balasa

Vijaygopal Balasa is a blogger with a passion for writing about a variety of topics and Founder/CEO of Androidstrike. In addition to blogging, he is also a Full-stack blockchain engineer by profession and a tech enthusiast. He has a strong interest in new technologies and is always looking for ways to stay up-to-date with the latest developments in the field.

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.