Guide on how to root Xiaomi Redmi 13C 5G using Magisk:
If you’re looking to unlock the full potential of your device and gain complete control over its functionality, rooting is the way to go. By following these step-by-step instructions, you’ll be able to customize your phone, install custom ROMs, and experience a whole new level of freedom and customization. So, let’s get started and unleash the power of your Xiaomi Redmi 13C 5G.
What is Magisk and Why Should You Use it?
Magisk is a powerful tool that allows you to customize and modify your Android device without altering the system partition. One of its notable features is the ability to remove bloatware, those pesky pre-installed apps that often take up valuable space on your device.
Magisk offers the following benefits when it comes to removing bloatware:
- Root access without modifying the system partition: Magisk’s “systemless” approach ensures that your device remains intact, making it safe and easy to remove unwanted apps without causing any system instability.
- Preserve system integrity: Since Magisk hides modifications from the system, it ensures that your device maintains its official firmware status, allowing you to still receive OTA updates and use banking apps that might otherwise block or detect root access.
- Increased control and customization: Magisk allows for deeper customization of your device by offering a range of modules that can enhance the user experience, such as battery-saving tweaks or theming options.
Why Root Your Xiaomi Redmi 13C 5G?
Rooting your Xiaomi Redmi 13C 5G opens up a world of possibilities. Here are a few reasons why you might want to root your device:
- Customization: By rooting your phone, you’ll have access to a variety of custom ROMs, themes, and mods that can completely transform the look and feel of your device.
- Performance Optimization: With root access, you can fine-tune your device’s performance by overclocking the CPU, undervolting the GPU, and adjusting other system parameters to achieve the perfect balance between speed and battery life.
- Bloatware Removal: Rooting allows you to remove pre-installed apps (bloatware) that you don’t need, freeing up storage space and improving system performance.
- Backup and Restore: Rooting gives you access to powerful backup and restore tools, allowing you to easily create full device backups and restore them in case anything goes wrong.
Now that you understand the benefits, let’s dive into the preparations you need to make before rooting your Xiaomi Redmi 13C 5G.
Preparation Before Rooting
But before you dive in, it’s essential to make sure you’re well-prepared for the process. Follow these steps to ensure a smooth rooting experience:
Understanding the Basics of Rooting
Before you begin rooting your Android device, it’s crucial to have a solid understanding of what rooting entails. Rooting is the process of gaining privileged control, known as “root access,” over your device’s operating system. It allows you to modify system files, install custom ROMs, and use apps that require administrative permissions.
Here are a few key points to keep in mind as you begin your journey into rooting:
- Benefits of Rooting: Rooting unlocks a world of benefits, including the ability to remove bloatware, boost performance, increase battery life, and install powerful root-only apps that can take your device to the next level.
- Risks and Considerations: While rooting can offer a myriad of advantages, it’s important to note that there are risks involved. Rooting your device could void your warranty, cause instability or security issues if done incorrectly, and potentially even brick your device, rendering it useless.
- Device Compatibility: Not all Android devices can be rooted, as it depends on the device model and manufacturer restrictions. Before diving into the process, check if your device is compatible with rooting.
Unlocking the Bootloader
Before you can root your Android device, you’ll need to unlock the bootloader. The bootloader is a program that loads the operating system when your device starts up, and unlocking it is a necessary step in gaining root access.
Here’s how you can unlock the bootloader of your Android device:
- Backup your data: Unlocking the bootloader usually involves wiping your device’s data, so it’s important to back up any important files before you start.
- Enable Developer Options: Go to your device’s settings, locate the “About phone” section, and tap on the “Build number” repeatedly until you see a message confirming that you’ve unlocked developer options.
- Enable OEM Unlocking: In the newly unlocked developer options, find the “OEM unlocking” toggle and enable it.
- Reboot to Fastboot Mode: Turn off your device and then hold down the appropriate key combination to boot into Fastboot mode. This combination varies depending on the device, so you may need to consult your device’s manual.
- Unlock the Bootloader: Connect your device to your computer, open a command prompt or terminal window, and enter the necessary command to unlock the bootloader. You can read the complete article on how to unlock the bootloader to Xiaomi Redmi 13C 5G
Once you’ve successfully unlocked the bootloader, you’re one step closer to rooting your device.
Flashing a Custom Recovery
To install a custom ROM or root your Android device, you’ll need to flash a custom recovery. A custom recovery is a modified version of the stock recovery that allows you to perform advanced operations on your device, such as installing custom ROMs, creating backups, and flashing ZIP files.
Here’s a general overview of the steps involved in flashing a custom recovery:
- Find a Compatible Custom Recovery: Research and find a custom recovery that is compatible with your device. Popular options include TWRP (Team Win Recovery Project) and ClockworkMod Recovery.
- Download the Custom Recovery Image: Visit the official website of the custom recovery and download the appropriate recovery image for your device.
- Transfer the Image to Your Device: Connect your device to your computer and transfer the custom recovery image to a location that you can easily access.
- Boot into Fastboot Mode: Turn off your device and then hold down the appropriate key combination to boot into Fastboot mode.
- Flash the Recovery Image: Open a command prompt or terminal window, navigate to the location where you transferred the custom recovery image, and enter the necessary command to flash the recovery. Again, the specific command will vary depending on the custom recovery and your device.
We have also published an article on how to Install TWRP Recovery on Xiaomi Redmi 13C 5G.
Once you’ve successfully flashed a custom recovery, you’re ready to move on to the next step: actually rooting your device using Magisk.
Unlocking the bootloader and flashing a custom recovery is required for rooting with Magisk
With these preparatory steps completed, you’re now equipped with the knowledge and tools you need to root your Android device. In the next sections, we’ll guide you through the rooting process, step by step, using the versatile rooting tool, Magisk. So, let’s get started and unlock the full potential of your Android device!
Steps to Root Xiaomi Redmi 13C 5G Using Magisk:
In this section, we will walk you through the step-by-step process of rooting your Xiaomi Redmi 13C 5G with Magisk.
Before we begin, make sure you have the following items ready:
- Enable USB debugging on your Xiaomi Redmi 13C 5G. You can do this by going to Settings -> About Phone -> tap on MIUI version several times to enable Developer options -> go back to Settings -> Additional settings -> Developer options -> USB debugging -> Enable.
- A full backup of your device’s data, as the rooting process may result in data loss.
Once you have everything prepared, follow these steps to download Magisk:
- Download the Magisk ZIP and APK file by clicking here.
- Look for the Download Magisk button and click on it.
- Select the latest version of Magisk and click on Download.
- Save the Magisk zip file to a location on your computer where you can easily find it later.
Flashing Magisk from TWRP Recovery
To flash Magisk from TWRP recovery, follow these instructions:
- Power off your Xiaomi Redmi 13C 5G.
- Press and hold the Volume Up + Power buttons simultaneously until the device enters TWRP recovery mode.
- Once in TWRP recovery, click on the Install button.
- Navigate to the location where you saved the Magisk zip file and select it.
- Swipe to confirm the flash and wait for the process to complete.
- Once the flashing process is done, go back to the TWRP main menu and click on Reboot.
- Congratulations! You have successfully flashed Magisk from TWRP recovery.
Rooting With Magisk App without Recovery
If you prefer to root your Xiaomi Redmi 13C 5G without using TWRP recovery, you can do it using the Magisk app. Here’s how:
- Make sure you have already downloaded the Magisk zip file from the official website mentioned earlier.
- Copy the Magisk zip file to the internal storage of your Xiaomi Redmi 13C 5G.
- Open the Magisk app on your device.
- Tap on the Install button.
- Select Install again.
- Choose the option Select and Patch a File, and navigate to the location where you saved the Magisk zip file.
- The Magisk app will now patch the boot image with the Magisk binary.
- Once the patching process is completed, the Magisk app will generate a modified boot image (magisk_patched.img) in the Download folder.
- Copy the magisk_patched.img file to your computer.
- Power off your device.
- Boot your Xiaomi Redmi 13C 5G into fastboot mode by pressing and holding the Volume Down + Power buttons simultaneously.
- Connect your device to the computer using a USB cable.
- Open a command prompt or terminal window on your computer and navigate to the folder where you placed the magisk_patched.img file.
- In the command prompt or terminal window, enter the following command to flash the modified boot image:
fastboot flash boot magisk_patched.img
- Once the flashing process is completed, reboot your device by entering the following command:
- Congratulations! You have successfully rooted your Xiaomi Redmi 13C 5G using the Magisk app without recovery.
Remember, rooting your device gives you additional control and customization options, but it also comes with certain risks. Make sure to follow the steps carefully and take proper precautions to avoid any data loss or damage to your device.
I hope this article has helped you to root your Xiaomi Redmi 13C 5G Using Magisk. If you have any queries, please feel free to ask them in the comment section below. Additionally, consider sharing this article with your friends and bookmarking our website for more tutorials like these.
Frequently Asked Questions
- What is Magisk?
Magisk is a popular and powerful rooting tool for Android devices that allows users to gain root access while still maintaining the ability to use certain apps that may not work on rooted devices.
- Why would I want to root my Xiaomi Redmi 13C 5G?
Rooting your Xiaomi Redmi 13C 5G can provide you with administrative access to your device, allowing you to customize and optimize various aspects of your phone’s performance, install custom ROMs, remove bloatware, and more.
- Is it safe to root my Xiaomi Redmi 13C 5G?
Rooting your Xiaomi Redmi 13C 5G comes with certain risks, such as voiding your warranty, potential security vulnerabilities, and the possibility of bricking your device if not done correctly. It’s important to follow proper instructions and take necessary precautions.
- How can I root my Xiaomi Redmi 13C 5G with Magisk?
To root your Xiaomi Redmi 13C 5G with Magisk, you need to unlock the bootloader, install a custom recovery such as TWRP, and then flash the Magisk zip file through the recovery. It is recommended to follow a detailed tutorial or guide for your specific device model to ensure a successful root.
- What are the advantages of using Magisk for rooting?
Magisk offers several advantages for rooting, such as systemless root, which allows you to pass SafetyNet and use apps that typically don’t work on rooted devices. It also provides features like Magisk Modules, root hide capabilities, and the ability to easily manage root access for individual apps.